Extrusion & Post
3 Aufrufe
Unstable frost line height of low density polyethylene film
Problembeschreibung
The frost line height of blown film fluctuates greatly, film thickness and quality unstable.
Frost line height reflects cooling condition stability, directly affecting film performance.
Ursachenanalyse
(1) Unstable air ring air volume or air speed
(2) Extrusion temperature fluctuation
(3) Ambient airflow interference
(4) Screw rotation speed fluctuation
(5) Cooling air temperature fluctuation
Lösung
(1) Check air ring blower and valves, ensure stable air volume
(2) Stabilize extrusion temperature, control fluctuation within ±3°C (160-220°C range)
(3) Install wind shields or isolation curtains, reduce ambient airflow interference
(4) Stabilize screw rotation speed
(5) Use constant temperature cooling air, reduce temperature fluctuation
Wichtigste Erkenntnis
Unstable frost line is caused by fluctuating cooling or extrusion conditions; air ring parameters and environmental conditions need to be stabilized.
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!