Extrusion & Post
3 Aufrufe
Haul-off speed mismatch of heat-resistant polyethylene extruded products
Problembeschreibung
The extrudate is uneven in thickness; when the haul-off is too fast the product becomes thinner and narrower, and when the haul-off is too slow the product becomes thicker and wider.
Mismatch between haul-off speed and extrusion speed causes product dimensional deviation.
Ursachenanalyse
(1) Haul-off speed setting does not match extrusion speed
(2) Haul-off machine slips, actual haul-off speed unstable
(3) Haul-off clamping force insufficient or excessive
(4) Extrusion speed fluctuation makes haul-off difficult to synchronize
(5) Haul-off control system responds slowly
Lösung
(1) Adjust haul-off speed to match extrusion speed, determine synchronous speed by weighing method
(2) Check haul-off tracks or rollers to ensure no slipping, replace clamping pads if necessary
(3) Adjust haul-off clamping force to ensure uniform clamping without damaging the product
(4) Stabilize extrusion speed, reduce fluctuation
(5) Upgrade the haul-off control system to improve response speed and accuracy
Wichtigste Erkenntnis
Haul-off speed mismatch needs to be solved by precisely adjusting haul-off parameters and ensuring haul-off stability.
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!