Extrusion & Post
3 Aufrufe
Heat-resistant polyethylene heat-resistant polyethylene process linkage problem when switching production between different processing methods
Problembeschreibung
When switching production from one processing method to another (such as from injection to extrusion), product quality fluctuates greatly and long debugging time is required.
Poor process linkage affects production efficiency and product quality.
Ursachenanalyse
(1) Different processing methods have different material requirements (MFR, molecular weight, etc.)
(2) Parameter settings do not match after equipment conversion
(3) Operators unfamiliar with the other processing method
(4) Raw material batch differences superimposed on changeover adjustment
(5) Insufficient preparation before changeover
Lösung
(1) Establish changeover operating procedures, clarify the process parameter range of each processing method
(2) Prepare suitable material grades before changeover
(3) Operators trained in multiple processing methods
(4) Do small-batch trial production first at changeover, mass production after passing inspection
(5) Establish material processing adaptability files
Wichtigste Erkenntnis
Production changeover linkage needs advance planning and full preparation; the key is to clarify the differentiated requirements of different processing methods for materials.
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!