Extrusion & Post
7 visualizações
Heat-resistant polyethylene heat-resistant polyethylene process linkage problem when switching production between different processing methods
Fenómeno do problema
When switching production from one processing method to another (such as from injection to extrusion), product quality fluctuates greatly and long debugging time is required.
Poor process linkage affects production efficiency and product quality.
Análise das causas
(1) Different processing methods have different material requirements (MFR, molecular weight, etc.)
(2) Parameter settings do not match after equipment conversion
(3) Operators unfamiliar with the other processing method
(4) Raw material batch differences superimposed on changeover adjustment
(5) Insufficient preparation before changeover
Solução
(1) Establish changeover operating procedures, clarify the process parameter range of each processing method
(2) Prepare suitable material grades before changeover
(3) Operators trained in multiple processing methods
(4) Do small-batch trial production first at changeover, mass production after passing inspection
(5) Establish material processing adaptability files
Conclusão principal
Production changeover linkage needs advance planning and full preparation; the key is to clarify the differentiated requirements of different processing methods for materials.
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!