Molds & Tooling
7 visualizaciones
EVA foaming mold temperature unevenness
Fenómeno del problema
Different positions of the same mold have different foaming degrees.
Análisis de la causa
Unreasonable design of the mold heating channels causes a temperature difference exceeding 10°C; aging of heating elements also causes local temperature deviation.; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based on experience alone
Solución
①Optimize the mold heating channel design; ②adopt a high-precision temperature control system; ③regularly test the mold temperature distribution; ④replace aged heating elements.; after adjustment, take consecutive samples to verify the effect, and resume mass production only after confirming stability
Conclusión clave
Mold temperature uniformity is the hardware foundation of foaming consistency; regular heat distribution testing should be included in maintenance.; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!