Molds & Tooling
7 visualizaciones
PC Trapped Air Burning
Fenómeno del problema
[Problem Phenomenon] PC end rib areas are burnt and blackened, with a peculiar smell
Análisis de la causa
Trapped air is adiabatically compressed, heated and burnt; PC is sensitive to high temperature and more prone to burning; poor venting combined with high melt temperature superimposes; when troubleshooting on site, verify each item according to this mechanism one by one, and avoid blindly adjusting the machine based on experience alone
Solución
Strengthen venting at the end; reduce the final-stage injection speed; adjust the melt temperature back from the upper limit; after adjustment, take samples continuously to verify the effect, and resume mass production only after confirming stability; change only one variable at a time and record parameter changes, so as to locate effective measures
Conclusión clave
For PC burning, first clear the venting; high-temperature materials fear trapped air more; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a reference for troubleshooting similar problems in the future
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!