Extrusion & Post
10 visualizaciones
PMMA CNC Cracking
Fenómeno del problema
After CNC machining, PMMA sheet edges chip and hole edges whiten and crack, especially around drilled holes
Análisis de la causa
Dull tools and improper parameters cause stress concentration on the machined surface; extruded sheets have high internal stress and are more prone to cracking; uneven clamping pressure causes local mechanical stress; cutting heat stretches molecular chains
Solución
①Keep tools sharp and replace them regularly; ②optimize cutting parameters with layered cutting of 0.2-0.6mm; ③switch to cast sheets for high-requirement parts and anneal before machining; after adjustment, take samples continuously to verify the effect, and resume mass production only after confirming stability
Conclusión clave
PMMA CNC cracking is the superposition of stress and heat; sharp tools, layered cutting, and cast sheet annealing are applied together; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!