Molds & Tooling
8 visualizaciones
PP Mold Sticking and Scratching
Fenómeno del problema
【Problem Phenomenon】PP products stick to mold and get scratched, demolding is difficult
Análisis de la causa
PP has large shrinkage and strong gripping; excessive holding pressure, insufficient draft, and improper polishing aggravate it; during on-site troubleshooting, verify item by item according to this mechanism to avoid blindly adjusting the machine based only on experience
Solución
Reduce holding pressure; check draft and polishing; balanced ejection; mold release agent assistance; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability; change only one variable at a time and record parameter changes to facilitate locating effective measures
Conclusión clave
PP mold sticking is due to shrinkage gripping, reduce holding pressure and check draft; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for similar problems in the future
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!