Molds & Tooling
4 visualizaciones
PP Gate Mark Whitening
Fenómeno del problema
【Problem Phenomenon】PP gate cut whitens
Análisis de la causa
Shear stress concentration in the gate area; PP toughness causes stress whitening of the cut surface; during on-site troubleshooting, verify item by item according to this mechanism to avoid blindly adjusting the machine based only on experience; this mechanism has been repeatedly verified by industry data and should be confirmed first during troubleshooting
Solución
Open the gate on a non-appearance surface; sharp trimming; submarine pinpoint gate; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability; change only one variable at a time and record parameter changes to facilitate locating effective measures
Conclusión clave
PP gate marks rely on position plus sharp trimming; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for similar problems in the future
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!