Molds & Tooling
8 visualizaciones
Mold Venting for PS Products
Fenómeno del problema
Trapped air burning on transparent parts affects appearance.
Análisis de la causa
Poor venting causes gas to burn due to adiabatic compression; transparent parts have zero tolerance for burn marks.; During on-site troubleshooting, verify item by item according to this mechanism, avoiding blindly adjusting the machine based solely on experience; This mechanism has been repeatedly verified by industry literature and should be confirmed first during troubleshooting
Solución
①Improve the venting system; ②Focus on venting at the end of fill; ③Assist by reducing speed; ④Regularly clean vent grooves.; After adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
Conclusión clave
Venting design for transparent parts must be more adequate; burn marks are the indication for adding venting.; After confirming effectiveness, solidify the parameters and practices into the work instructions to prevent recurrence; Include this case in the defect archive as a reference for troubleshooting similar problems in the future
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!