Extrusion & Post
10 visualizaciones
PVC Welding Assembly
Fenómeno del problema
PVC parts showed insufficient welding strength, weld leakage, or discoloration and degradation at the weld
Análisis de la causa
PVC can be hot-air welded and solvent bonded; improper welding temperature control causes degradation and discoloration; coating uniformity of solvent bonding determines sealing reliability; during on-site troubleshooting, verify item by item according to this mechanism to avoid blindly adjusting the machine based only on experience
Solución
①Precisely control hot-air welding temperature to prevent degradation; ②apply solvent bonding uniformly and cure fully; ③post-weld sealing test; after adjustment, continuously sample to verify the effect, and resume mass production after confirming stability
Conclusión clave
PVC welding has two routes: heat and solvent; their quality points differ but neither can exceed the temperature limit; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!