Extrusion & Post
10 visualizaciones
TPE extrusion output instability
Fenómeno del problema
TPE extrusion output fluctuates, product dimensions are uneven, and the screw slips
Análisis de la causa
Causes of unstable TPE extrusion output: unstable melting point, large temperature fluctuations, slipping between the screw and the pellets; insufficient pellet preheating, excessive external lubricant; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience
Solución
①change extrusion conditions and screw shape; ②improve temperature control accuracy; ③preheat pellets and reduce external lubricant; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
Conclusión clave
TPE extrusion stability relies on temperature accuracy and pellet condition; slipping is an alarm of the feeding system; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!