Extrusion & Post
14 visualizaciones
Rough EEA extrusion surface
Fenómeno del problema
EEA extruded product surface roughness Ra>5μm exceeding requirements
Análisis de la causa
Extrusion temperature too low <160°C, unstable melt flow; die inner wall rough or damaged; EEA melt elasticity, uneven extrusion swell
Solución
1) Increase extrusion temperature to 160-210°C; 2) Polish the die inner wall to Ra<0.4μm; 3) Reduce extrusion rate by 10-15%; 4) Add 0.3-0.5wt% external lubricant
Conclusión clave
Rough surface is caused by low-temperature extrusion and die defects; increasing temperature and polishing the die are the core countermeasures
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!