Extrusion & Post
14 visualizaciones
Bending deformation of EVA extruded profiles
Fenómeno del problema
EVA extruded profiles continuously bend after cooling with deflection >5mm/m
Análisis de la causa
Uneven cooling on each face of the profile causes shrinkage differences; uneven die exit flow velocity makes each wall thickness of the profile different; haul-off and extrusion centerline misaligned producing lateral force
Solución
1) Optimize cooling system to ensure uniform cooling on each face; 2) Adjust die to make each wall flow velocity uniform and wall thickness consistent; 3) Align haul-off with extrusion centerline; 4) Increase sizing sleeve length to cool after full sizing
Conclusión clave
Profile bending is caused by uneven cooling and uneven flow velocity; homogenization and alignment are the key to solution
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!