Extrusion & Post
14 visualizaciones
Frequent screen clogging in PU extrusion
Fenómeno del problema
In PU extrusion, the screen needs to be replaced every 2-3h; clogging causes sudden pressure rise and output decrease
Análisis de la causa
Many gel particles and impurities in the raw material; screen mesh too high intercepting a large number of particles; filler or color masterbatch agglomerates clogging the screen
Solución
1) Select raw material with low gel content; 2) Adopt stepped screens 40/80/120 mesh; 3) Add filler and color masterbatch by masterbatch method to reduce agglomeration; 4) Install automatic screen changer to reduce downtime
Conclusión clave
Screen clogging is caused by impurities and improper configuration; raw material control and stepped screens are key
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!