Molding Process
4 visualizaciones
Large PVA compression set
Fenómeno del problema
PVA product compression set >30%, below the 15% requirement
Análisis de la causa
PVA elastic recovery insufficient; crosslinking degree on the low side, plastic deformation unrecoverable; density on the low side, thin cell walls, poor recovery
Solución
1) Increase crosslinking degree to 60-70% to reduce plastic deformation; 2) Select high elastic recovery PVA grade; 3) Add reinforcing filler
Conclusión clave
Large compression set is caused by insufficient crosslinking; increasing crosslinking degree is the key
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!