Molding Process
4 visualizaciones
PVA hardness too low
Fenómeno del problema
PVA product Shore hardness 5-10 degrees lower than target, soft to the touch
Análisis de la causa
PVA soft nature, low hardness; too much plasticizer or softener added; crystallinity on the low side
Solución
1) Add rigid filler 5-10wt% to increase hardness; 2) Reduce plasticizer amount; 3) Increase cooling rate to increase crystallinity
Conclusión clave
Low hardness is caused by soft material and excessive plasticization; adding filler is the key
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!