Extrusion & Post
14 visualizaciones
CEF extrusion feeding unstable
Fenómeno del problema
The CEF extrusion feeding amount fluctuates ±15%, causing unstable extrusion pressure and product dimensions
Análisis de la causa
The irregular shape of CEF particles causes unstable filling rate of the feeding screw; bridging or voids in the hopper; the feeding screw design is not suitable
Solución
1) Use a loss-in-weight feeder to precisely control the feeding amount; 2) Install a vibrator on the hopper to prevent bridging; 3) Granulate CEF to a uniform particle size of 2-3mm; 4) Change the feeding screw to a special design
Conclusión clave
Unstable feeding is caused by particle characteristics; loss-in-weight feeding and anti-bridging are the core
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!