Extrusion & Post
8 visualizaciones
POE extrusion surface rough
Fenómeno del problema
POE extruded product surface roughness Ra>5μm, exceeding requirement
Análisis de la causa
Extrusion temperature too low <160°C, melt flow unstable; die inner wall rough or damaged; POE melt elasticity, die swell uneven
Solución
1) Raise extrusion temperature to 160-200°C; 2) Polish die inner wall to Ra<0.4μm; 3) Reduce extrusion rate 10-15%; 4) Add 0.3-0.5wt% external lubricant
Conclusión clave
Surface roughness is caused by low-temperature extrusion and die defects; raising temperature and polishing the die are core countermeasures
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!