Injection Molding
15 visualizaciones
Ejector Whitening of PBT Injection-Molded Products
Fenómeno del problema
White patches or stress cracks appear at the ejector pin positions when PBT products are demolded.
Análisis de la causa
The ejection force is too large or the ejector pin area is too small, and the local stress exceeds the limit; the draft angle is insufficient, increasing the demolding force; the cooling is insufficient and the strength is not enough.
Solución
Increase the ejector pin area or increase the number; increase the draft angle ≥2°; extend the cooling time.
Conclusión clave
PBT ejector whitening is the result of excessive local stress.
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!