Extrusion & Post
8 visualizaciones
Uneven Surface of ABS Variant Extruded Pipe
Fenómeno del problema
Unevenness appears on the surface of the extruded pipe, affecting product appearance and subsequent processing quality.
This problem is common in ABS variant extrusion production.
Análisis de la causa
(1) The extrusion temperature (220-260°C) is set improperly, and the melt quality is unstable
(2) The screw speed and haul-off speed are improperly matched
(3) Die condition or design problems
(4) The cooling system is set improperly
(5) Raw material quality or pretreatment problems
Solución
(1) Optimize the extrusion temperature to a reasonable value within the range of 220-260°C
(2) Stabilize the screw speed and haul-off speed
(3) Check the die condition, clean the accumulated material or repair damage
(4) Adjust the cooling water temperature and flow
(5) Ensure the raw material is dry (70-80°C, 3-4h) and clean
Conclusión clave
Extrusion surface defects need to be controlled from three aspects: temperature, speed, and die condition.
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!