Injection Molding
4 조회수
ABS burnt (trapped air burn marks)
문제 현상
Black/brown burn marks appear at the end of the cavity, rib ends, or weld lines, possibly accompanied by odor.
원인 분석
During filling, the air in the cavity is compressed and cannot be discharged, producing the diesel effect that burns the plastic at high temperature; blocked vent grooves or too fast injection speed are the main causes.
해결 방법
①Open/deepen vent grooves at the burnt position (ABS vent depth about 0.02~0.04mm); ②clean the vents blocked by oil; ③reduce the end injection speed; ④reduce the amount of mold release agent.
핵심 요약
Repeated burning at a fixed position=venting problem; clean the vent grooves first.
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!