Injection Molding
7 visualizações
ABS burnt (trapped air burn marks)
Fenómeno do problema
Black/brown burn marks appear at the end of the cavity, rib ends, or weld lines, possibly accompanied by odor.
Análise das causas
During filling, the air in the cavity is compressed and cannot be discharged, producing the diesel effect that burns the plastic at high temperature; blocked vent grooves or too fast injection speed are the main causes.
Solução
①Open/deepen vent grooves at the burnt position (ABS vent depth about 0.02~0.04mm); ②clean the vents blocked by oil; ③reduce the end injection speed; ④reduce the amount of mold release agent.
Conclusão principal
Repeated burning at a fixed position=venting problem; clean the vent grooves first.
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!