Injection Molding
6 مشاهدة
ABS burnt (trapped air burn marks)
ظاهرة المشكلة
Black/brown burn marks appear at the end of the cavity, rib ends, or weld lines, possibly accompanied by odor.
تحليل الأسباب
During filling, the air in the cavity is compressed and cannot be discharged, producing the diesel effect that burns the plastic at high temperature; blocked vent grooves or too fast injection speed are the main causes.
الحل
①Open/deepen vent grooves at the burnt position (ABS vent depth about 0.02~0.04mm); ②clean the vents blocked by oil; ③reduce the end injection speed; ④reduce the amount of mold release agent.
الخلاصة الأساسية
Repeated burning at a fixed position=venting problem; clean the vent grooves first.
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!