Molds & Tooling
7 조회수
ABS ejector white and ejector crack
문제 현상
[Problem Phenomenon] ABS whitening and push-through at ejector pins
원인 분석
Insufficient cooling and low strength, few and small ejector pins, fast ejection; during on-site troubleshooting, verify item by item according to this mechanism, avoid blindly adjusting the machine based only on experience; this mechanism has been repeatedly verified by industry materials and should be confirmed first during troubleshooting
해결 방법
Extend cooling; add ejector pins; reduce ejection speed; after adjustment, continuously sample to verify the effect, resume mass production only after confirming stability; change only one variable each time and record parameter changes to facilitate locating effective measures
핵심 요약
For ABS ejector white check cooling and ejection balance; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for similar problems later
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!