Molds & Tooling
3 visualizações
ABS ejector white and ejector crack
Fenómeno do problema
[Problem Phenomenon] ABS whitening and push-through at ejector pins
Análise das causas
Insufficient cooling and low strength, few and small ejector pins, fast ejection; during on-site troubleshooting, verify item by item according to this mechanism, avoid blindly adjusting the machine based only on experience; this mechanism has been repeatedly verified by industry materials and should be confirmed first during troubleshooting
Solução
Extend cooling; add ejector pins; reduce ejection speed; after adjustment, continuously sample to verify the effect, resume mass production only after confirming stability; change only one variable each time and record parameter changes to facilitate locating effective measures
Conclusão principal
For ABS ejector white check cooling and ejection balance; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for similar problems later
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!