Material Drying
4 조회수
EVA adhesive film moisture absorption during storage
문제 현상
After using adhesive film stored for a long time, bubbles in the modules increase.
원인 분석
After EVA adhesive film absorbs moisture, the water vaporizes during lamination to form bubbles; high storage environment humidity and damaged packaging accelerate moisture absorption.; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based on experience alone
해결 방법
①Store the adhesive film sealed and control humidity; ②bake moisture-absorbed film to remove moisture before use; ③control the inventory cycle with first-in-first-out; ④check packaging integrity before use.; after adjustment, take consecutive samples to verify the effect, and resume mass production only after confirming stability
핵심 요약
Adhesive film storage management is the source of module quality; first-in-first-out and sealing are basic requirements.; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!