Material Drying
7 visualizações
EVA adhesive film moisture absorption during storage
Fenómeno do problema
After using adhesive film stored for a long time, bubbles in the modules increase.
Análise das causas
After EVA adhesive film absorbs moisture, the water vaporizes during lamination to form bubbles; high storage environment humidity and damaged packaging accelerate moisture absorption.; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based on experience alone
Solução
①Store the adhesive film sealed and control humidity; ②bake moisture-absorbed film to remove moisture before use; ③control the inventory cycle with first-in-first-out; ④check packaging integrity before use.; after adjustment, take consecutive samples to verify the effect, and resume mass production only after confirming stability
Conclusão principal
Adhesive film storage management is the source of module quality; first-in-first-out and sealing are basic requirements.; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!