Material Drying
3 Aufrufe
EVA adhesive film moisture absorption during storage
Problembeschreibung
After using adhesive film stored for a long time, bubbles in the modules increase.
Ursachenanalyse
After EVA adhesive film absorbs moisture, the water vaporizes during lamination to form bubbles; high storage environment humidity and damaged packaging accelerate moisture absorption.; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based on experience alone
Lösung
①Store the adhesive film sealed and control humidity; ②bake moisture-absorbed film to remove moisture before use; ③control the inventory cycle with first-in-first-out; ④check packaging integrity before use.; after adjustment, take consecutive samples to verify the effect, and resume mass production only after confirming stability
Wichtigste Erkenntnis
Adhesive film storage management is the source of module quality; first-in-first-out and sealing are basic requirements.; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!