Molds & Tooling
4 조회수
HDPE Shrinkage Out of Tolerance
문제 현상
HDPE product dimensions are smaller than expected and cannot be assembled
원인 분석
HDPE shrinkage is 1.5-4% with obvious directionality, and mold shrinkage value selection is improper; during on-site troubleshooting, verify item by item according to this mechanism to avoid blindly adjusting the machine based solely on experience
해결 방법
Measure actual shrinkage to correct the mold; lock the process; SPC for critical dimensions; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability; change only one variable at a time and record parameter changes to facilitate locating effective measures
핵심 요약
HDPE dimensional management is based on measured shrinkage; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a reference for troubleshooting similar problems in the future
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!