Injection Molding
5 조회수
PC Flash
문제 현상
Thin flash appears at the parting line and ejector pins, often accompanied by clamping alarms.
원인 분석
Under high-pressure filling, the cavity pressure exceeds the clamping force; PC requires high injection pressure and is more likely to push the mold open; parting line wear or insufficient clamping tonnage is the direct cause.
해결 방법
①Reduce injection/holding pressure; ②Calculate and increase the clamping force; ③Repair the parting line; ④Advance the holding pressure switchover point to avoid over-filling.
핵심 요약
With PC's high-pressure process, the clamping margin must be left sufficient.
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!