Injection Molding
8 visualizaciones
PC Flash
Fenómeno del problema
Thin flash appears at the parting line and ejector pins, often accompanied by clamping alarms.
Análisis de la causa
Under high-pressure filling, the cavity pressure exceeds the clamping force; PC requires high injection pressure and is more likely to push the mold open; parting line wear or insufficient clamping tonnage is the direct cause.
Solución
①Reduce injection/holding pressure; ②Calculate and increase the clamping force; ③Repair the parting line; ④Advance the holding pressure switchover point to avoid over-filling.
Conclusión clave
With PC's high-pressure process, the clamping margin must be left sufficient.
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!