Molds & Tooling
3 조회수
PC/ABS sink mark
문제 현상
Depression at thick-walled rib positions.
원인 분석
Insufficient holding pressure or uneven wall thickness; gate freezes early and shrinkage compensation is interrupted.; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based on experience alone; this mechanism has been repeatedly verified by industry data and should be confirmed first during troubleshooting
해결 방법
①Increase holding pressure and time; ②core out thick areas; ③enlarge the gate; ④uniform wall thickness.; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability
핵심 요약
Sink marks follow the shrinkage compensation mechanism; structural design is fundamental.; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for similar problems later
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!