Molds & Tooling
4 görüntüleme
PC/ABS sink mark
Sorun Belirtisi
Depression at thick-walled rib positions.
Neden Analizi
Insufficient holding pressure or uneven wall thickness; gate freezes early and shrinkage compensation is interrupted.; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based on experience alone; this mechanism has been repeatedly verified by industry data and should be confirmed first during troubleshooting
Çözüm
①Increase holding pressure and time; ②core out thick areas; ③enlarge the gate; ④uniform wall thickness.; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability
Temel Çıkarım
Sink marks follow the shrinkage compensation mechanism; structural design is fundamental.; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for similar problems later
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!