Molds & Tooling
6 visualizações
PC/ABS sink mark
Fenómeno do problema
Depression at thick-walled rib positions.
Análise das causas
Insufficient holding pressure or uneven wall thickness; gate freezes early and shrinkage compensation is interrupted.; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based on experience alone; this mechanism has been repeatedly verified by industry data and should be confirmed first during troubleshooting
Solução
①Increase holding pressure and time; ②core out thick areas; ③enlarge the gate; ④uniform wall thickness.; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability
Conclusão principal
Sink marks follow the shrinkage compensation mechanism; structural design is fundamental.; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for similar problems later
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!