Extrusion & Post
4 조회수
PCABS FDM printing temperature
문제 현상
【Problem Phenomenon】PC/ABS filament printing has weak interlayer or deformation, improper parameters
원인 분석
PC/ABS FDM nozzle 250-270℃, bed temperature 100-110℃, requires an enclosed chamber; higher temperature than pure ABS, interlayer strength depends on full melting
해결 방법
Nozzle 250-270℃, bed temperature 100-110℃; enclosed chamber; filament dried at 60-80℃ for 4h; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability
핵심 요약
PC/ABS printing 250-270℃ with an enclosed chamber; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for similar problems later
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!