Molds & Tooling
4 조회수
PPS Mold Sticking and Difficult Demolding
문제 현상
Products stick to the cavity and are scratched during demolding.
원인 분석
High mold temperature causes thermal bonding between PPS and the mold; insufficient draft angle or improper surface condition.; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience
해결 방법
①Optimize mold temperature and cooling; ②increase draft angle; ③select appropriate mold surface treatment; ④balance the ejection system.; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability
핵심 요약
PPS mold sticking is related to high mold temperature; demolding design must adapt to the high-temperature process.; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!