Molds & Tooling
4 조회수
PTFE Mold Sticking
문제 현상
PTFE compression molding has demolding difficulty, product surfaces are scratched, and mold cleaning is frequent.
원인 분석
Insufficient mold cavity surface polishing Ra>0.8μm; microscopic adhesion between PTFE powder and mold; insufficient demolding angle; improper mold material selection.; When troubleshooting on site, verify item by item according to this mechanism, avoiding blind machine adjustment based only on experience
해결 방법
①Polish mold cavity to Ra≤0.8μm to reduce sticking; ②Select stainless steel material; ③Reasonable demolding angle; ④Use mold release agent assistance when necessary.; After adjustment, continuously sample to verify the effect, confirm stability before resuming mass production
핵심 요약
PTFE mold's Ra0.8 polishing standard is the anti-sticking foundation; stainless steel material is the standard choice; demolding design is considered upfront.; After confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!