Molds & Tooling
6 görüntüleme
PTFE Mold Sticking
Sorun Belirtisi
PTFE compression molding has demolding difficulty, product surfaces are scratched, and mold cleaning is frequent.
Neden Analizi
Insufficient mold cavity surface polishing Ra>0.8μm; microscopic adhesion between PTFE powder and mold; insufficient demolding angle; improper mold material selection.; When troubleshooting on site, verify item by item according to this mechanism, avoiding blind machine adjustment based only on experience
Çözüm
①Polish mold cavity to Ra≤0.8μm to reduce sticking; ②Select stainless steel material; ③Reasonable demolding angle; ④Use mold release agent assistance when necessary.; After adjustment, continuously sample to verify the effect, confirm stability before resuming mass production
Temel Çıkarım
PTFE mold's Ra0.8 polishing standard is the anti-sticking foundation; stainless steel material is the standard choice; demolding design is considered upfront.; After confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!