Molds & Tooling
3 Aufrufe
PTFE Mold Sticking
Problembeschreibung
PTFE compression molding has demolding difficulty, product surfaces are scratched, and mold cleaning is frequent.
Ursachenanalyse
Insufficient mold cavity surface polishing Ra>0.8μm; microscopic adhesion between PTFE powder and mold; insufficient demolding angle; improper mold material selection.; When troubleshooting on site, verify item by item according to this mechanism, avoiding blind machine adjustment based only on experience
Lösung
①Polish mold cavity to Ra≤0.8μm to reduce sticking; ②Select stainless steel material; ③Reasonable demolding angle; ④Use mold release agent assistance when necessary.; After adjustment, continuously sample to verify the effect, confirm stability before resuming mass production
Wichtigste Erkenntnis
PTFE mold's Ra0.8 polishing standard is the anti-sticking foundation; stainless steel material is the standard choice; demolding design is considered upfront.; After confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!