Processing Machinery
3 조회수
PTFE Thick-Walled Parts Insufficient Pressure
문제 현상
PTFE thick-walled products have insufficient internal density, loose centers, and poor mechanical strength and sealing performance.
원인 분석
Thick-walled parts need higher molding pressure, taking the high value of 20~50MPa; pressure transfer decays with thickness; holding pressure time needs to be extended with thickness; equipment pressure capability limitation.
해결 방법
①Take the high value of 20~50MPa molding pressure for thick-walled parts; ②Extend holding pressure time to ensure pressure transfer; ③Calculate equipment pressure capability; ④Section density inspection of thick-walled parts.
핵심 요약
PTFE thick-walled part pressure management should take the high value of the range; pressure transfer decay needs holding pressure compensation; section inspection is a verification means.; After confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!