Processing Machinery
4 görüntüleme
PTFE Thick-Walled Parts Insufficient Pressure
Sorun Belirtisi
PTFE thick-walled products have insufficient internal density, loose centers, and poor mechanical strength and sealing performance.
Neden Analizi
Thick-walled parts need higher molding pressure, taking the high value of 20~50MPa; pressure transfer decays with thickness; holding pressure time needs to be extended with thickness; equipment pressure capability limitation.
Çözüm
①Take the high value of 20~50MPa molding pressure for thick-walled parts; ②Extend holding pressure time to ensure pressure transfer; ③Calculate equipment pressure capability; ④Section density inspection of thick-walled parts.
Temel Çıkarım
PTFE thick-walled part pressure management should take the high value of the range; pressure transfer decay needs holding pressure compensation; section inspection is a verification means.; After confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!