Processing Machinery
5 مشاهدة
PTFE Thick-Walled Parts Insufficient Pressure
ظاهرة المشكلة
PTFE thick-walled products have insufficient internal density, loose centers, and poor mechanical strength and sealing performance.
تحليل الأسباب
Thick-walled parts need higher molding pressure, taking the high value of 20~50MPa; pressure transfer decays with thickness; holding pressure time needs to be extended with thickness; equipment pressure capability limitation.
الحل
①Take the high value of 20~50MPa molding pressure for thick-walled parts; ②Extend holding pressure time to ensure pressure transfer; ③Calculate equipment pressure capability; ④Section density inspection of thick-walled parts.
الخلاصة الأساسية
PTFE thick-walled part pressure management should take the high value of the range; pressure transfer decay needs holding pressure compensation; section inspection is a verification means.; After confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!