Molds & Tooling
4 조회수
TPU product surface scratch
문제 현상
Dragging scratch marks appear on the surface after demolding.
원인 분석
Improper demolding timing makes the product overheated and too soft; insufficient demolding draft or cavity surface finish mismatch (over-polishing causes vacuum adsorption instead); during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience
해결 방법
①extend cooling to improve demolding strength; ②ensure demolding draft; ③adjust cavity surface finish; ④optimize ejection timing; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
핵심 요약
TPU surface scratches are related to the demolding state; the surface is not the smoother the better, and appropriate roughness is actually beneficial to demolding; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!