Molds & Tooling
8 visualizaciones
TPU product surface scratch
Fenómeno del problema
Dragging scratch marks appear on the surface after demolding.
Análisis de la causa
Improper demolding timing makes the product overheated and too soft; insufficient demolding draft or cavity surface finish mismatch (over-polishing causes vacuum adsorption instead); during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience
Solución
①extend cooling to improve demolding strength; ②ensure demolding draft; ③adjust cavity surface finish; ④optimize ejection timing; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
Conclusión clave
TPU surface scratches are related to the demolding state; the surface is not the smoother the better, and appropriate roughness is actually beneficial to demolding; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!