Injection Molding
4 조회수
Flow marks appearing on PET injection molded parts
문제 현상
Wavy or snakeskin-like flow marks appear on the surface of PET products.
원인 분석
Melt temperature is on the low side and the flow front solidifies intermittently; injection speed is slow or unstable; cavity wall temperature is on the low side.
해결 방법
Increase melt temperature by 10-20°C; appropriately increase injection speed; mold temperature 130-150°C; optimize gate design.
핵심 요약
PET flow marks are caused by an unstable melt front during filling.
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!