Injection Molding
4 조회수
PETG injection molded product sticking at the hot runner gate
문제 현상
During demolding of PETG products, the residual sprue at the gate sticks to the hot runner nozzle opening.
원인 분석
The gate area temperature is high and melt viscosity low causing stringing, the hot runner valve pin does not close tightly, cooling insufficient and gate strength inadequate.
해결 방법
Precisely control the gate area temperature; check valve pin action and sealing; strengthen cooling at the gate location.
핵심 요약
PETG hot runner gate sticking requires investigation from temperature and mechanics.
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!