Injection Molding
8 visualizaciones
PETG injection molded product sticking at the hot runner gate
Fenómeno del problema
During demolding of PETG products, the residual sprue at the gate sticks to the hot runner nozzle opening.
Análisis de la causa
The gate area temperature is high and melt viscosity low causing stringing, the hot runner valve pin does not close tightly, cooling insufficient and gate strength inadequate.
Solución
Precisely control the gate area temperature; check valve pin action and sealing; strengthen cooling at the gate location.
Conclusión clave
PETG hot runner gate sticking requires investigation from temperature and mechanics.
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!