문제 및 해결책

일반적인 플라스틱 재료 문제에 대한 실질적인 답변

기사 둘러보기 →

Q

PEI Drying Equipment Requirements

A

The dew point indicator of PEI drying equipment is a hard constraint; the closed design with aftercooler is the standard configuration; equipment performance is verified regularly.; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence

Material Drying PEI;drying equipment;dew point;dehumidification;aftercooler;closed

Q

Improper PEI Drying Temperature

A

PEI drying temperature is narrow-window management; pre-crosslinking is a specific failure of excessive high temperature; grade-differentiated settings cannot be one-size-fits-all.; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence

Material Drying PEI;drying temperature;pre-crosslinking;grade;dehumidification;window

Q

PEI Insufficient Drying Bubbles and Silver Streaks

A

PEI's 0.02% moisture content red line is stricter than most engineering plastics; a dehumidifying dryer is an essential configuration; the 10-minute rule for secondary moisture absorption must be enforced on site.

Material Drying PEI;drying;bubble;silver streak;0.02%;hygroscopic

Q

PEEK Compression Molding Pores and Bubbles

A

Compression molding pores are controlled by double drying (material + mold) plus pre-pressing venting; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for simil...

Material Drying compression moldingporepowder dryingpre-pressing

Q

Brown Amorphous Skin Layer and Annealing Crystallization of PEEK

A

Remedy the brown skin layer with the 200℃ procedure annealing, and the heating and cooling rates must be controlled; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence

Material Drying annealing amorphous skin layer crystallinity heating rate

Q

Hopper Temperature Out of Control and Moisture Regain of PEEK

A

Passing drying is only the starting point, and hopper moisture-regain management determines the final moisture state; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting...

Material Drying hopper moisture regain insulated hopper moisture management residence

Q

Cross-Contamination in PEEK Drying

A

High-temperature materials have zero tolerance for contamination, and PEEK drying and transfer must be dedicated-line use; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence

Material Drying cross-contamination oven black speck contamination management

Q

PEEK Pellets Absorbing 0.5% Moisture and the Drying Red Line

A

0.02% moisture content is the life-and-death line of PEEK, and actual measurement with a moisture meter is more reliable than drying timing; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence

Material Drying PEEK drying 0.02% moisture content silver streak hydrolysis

Q

Internal Pores and Bubbles in PEEK

A

PEEK pores are the result of the superposition of the three factors of drying, venting, and packing; thick-wall parts and extruded profiles carry the highest risk; porosity should be included in the non-destructive testing items for critical parts.

Material Drying PEEK；pore；bubble；packing；drying；extrusion

Q

PEEK Silver Streaks Misdiagnosed as a Drying Problem

A

PEEK silver streaks are the defect with the highest clinical misdiagnosis rate; when moisture is qualified, immediately turn to nozzle inspection; nozzle carbon deposits form in just a few hours, and regular disassembly inspection is necessary maintenance for high-temperature materials.

Material Drying PEEK；silver streak；nozzle；carbon deposit；cold spot；misdiagnosis

이전 1 ... 87 88 89 90 91 92 93 ... 144 다음

카테고리

전체 주제 11636 Material Drying 1439 Injection Molding 1506 Molding Process 740 Molds & Tooling 1506 Processing Machinery 2025 Extrusion & Post 2239 Blow Molding 315 Thermoforming 141 Material Analysis 1343 Production & Quality 382