Molds & Tooling
10 visualizações
PA12 Product Sticking to Mold
Fenómeno do problema
The product sticks to the mold.
Análise das causas
Low mold temperature causes tight grip or surface interaction; improper demolding design.; During on-site troubleshooting, verify item by item according to this mechanism to avoid blindly adjusting the machine based solely on experience; This mechanism has been repeatedly verified by industry data and should be confirmed first during troubleshooting
Solução
①Optimize mold temperature; ②increase draft angle; ③polish cavity; ④balanced ejection.; After adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability; Change only one variable at a time and record parameter changes to facilitate locating effective measures
Conclusão principal
Solve mold sticking from temperature and structure.; After confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; Include this case in the defect archive as a troubleshooting reference for subsequent similar problems
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!